What are the main reasons for the excessive bearing load?

The main reasons for the excessive bearing load are as follows:

1, strong stamping

2, directly tap the bearing

3. Transfer pressure through the rolling elements.

Solution:

1. Try to use special tools to prevent the use of cloth and short fibers.

2. Even if the dust that is invisible to the naked eye enters the bearing, the wear, oscillation and noise of the bearing will be added.

3. When taking the deep groove ball bearing directly by hand, wash the sweat on the hand and apply it with high-quality mineral oil before handling. In the dry season and summer, pay special attention to rust prevention.

Under certain special operating conditions, deep groove ball bearings can achieve a better life than traditional accounting, especially in light load situations. These special operating conditions are that the tumbling faces (tracks and tumbling members) are effectively separated by a smooth oil film and confining the contaminants may cause damage to the exterior. In fact, under the ambition, the so-called long-deep ball bearing life is not impossible.