ACM series

The inner and outer raceways of angular contact ball bearings are relatively offset from each other in the direction of the bearing axis. This indicates that this type of bearing is designed to carry combined loads, namely radial load plus axial load.

The axial bearing capacity of angular contact ball bearings increases with the increase of contact angle. On the radial plane, the angle between the line connecting the contact point between the steel ball and the raceway (i.e. the direction in which the combined load is transmitted from one raceway to another) and the perpendicular line to the bearing axis.
 

This type of angular contact ball bearing can withstand both radial and axial loads acting simultaneously, while axial loads can only act in one direction. Depending on the type, this type of bearing can operate at high or even extremely high speeds. Compared to deep groove ball bearings, it can withstand larger axial forces in one direction.
 

Product features:

High speed capability

Capable of withstanding high radial loads and large unidirectional axial loads